To Next Page

To Previous Page

Command descriptions set permissions

ConnectPort® LTS Command Reference

Permissions for the “set group” command. (See "set group")

s-host={none|read|rw}

Permissions for the “set host” command. (See "set host")

s-internalmodem={none|read|rw}

Permissions for the “set internalmodem” command. (See "set internalmodem")

s-lcd ={none|read|rw}

Permissions for the “set lcd” command. (See "set lcd" )

s-modem ={none|read|rw}

Permissions for the “set modem” command. (See "set modem")

s-network={none|read|rw}

Permissions for the “set network” command. (See "set network")

s-permissions={none|read|rw}

Permissions for the “set permissions” command itself.

s-pmodem={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set pmodem” command. (See "set pmodem")

s-portauth ={none|read|rw}

Permissions for the “set portauth” command. (See "set portauth")

s-ppp={none|read|rw}

Permissions for the “set ppp” command. (See "set ppp")

s-profile={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set profile” command. (See "set profile")

s-python={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set python” command. (See "set python")

s-rtstoggle={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set rtstoggle” command. (See "set rtstoggle")

s-sdmemory ={none|read|rw}

Permissions for the “set sdmemory” command. (See "set sdmemory")

s-serial={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set serial” and "set switches" commands. (See "set serial" and "set switches")

s-service={none|read|rw}

Permissions for the “set service” command. (See "set service")

s-snmp={none|read|rw}

Permissions for the “set snmp” command. (See "set snmp")

s-socket-tunnel={none|read|rw}

Permissions for the "set socket_tunnel" command. (See "set socket_tunnel")

s-sysauth ={none|read|rw}

Permissions for the “set sysauth” command. (See "set sysauth")

s-system={none|read|rw}

Permissions for the “set system” command. (See "set system")

s-tcpserial={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set tcpserial” command. (See "set tcpserial")

s-trace={none|read|rw}

Brand	Digi
Model	ConnectPort LTS 8
Category	Server
Language	English

Digi ConnectPort LTS 8 Command Reference

Table of Contents

Other manuals for Digi ConnectPort LTS 8

Questions and Answers:

Digi ConnectPort LTS 8 Specifications

Related product manuals