Digi ConnectPort LTS8 Command Reference

Command descriptions set buffer
ConnectPort® LTS Command Reference
56
set buffer
Purpose
Configures buffering settings on a port, or displays the port buffer configuration settings on all ports.
The port buffering feature allows you to monitor incoming ASCII serial data in log form.
Required permissions
For products with two or more users, to use this command, permissions must be set to one of the
following:
n For a user to display the port buffering settings for the line on which they are logged in: “set
permissions buffers=r-self”
n For a user to display the port buffering settings for any line: “set permissions buffers=read”
n For a user to display and set the port buffering settings for the line on which they are logged in:
“set permissions buffers=rw-self”
n For a user to display the port buffering settings for any line, and set port buffering settings for
the line on which the user is logged in: “set permissions buffers=w-self-r”
n For a user to display and set the port buffering settings on any line “set permissions
buffers=rw”
See "set permissions" for details on setting user permissions for commands.
Syntax
Configure port buffering
set buffer [clear] [clearbk]
[port={ range |xbee|internalmodem}]
[size= number ]
[state={on|off|pause}]
[autobk=(none|nfs|samba|sdmemory|usb)]
[autobk_size=0-64]
[syslog state={off|on}]
Display port buffering settings
set buffer [port= port ]
Options
clear
Clears the contents of the specified buffer.
clearbk
Clears the autobackup file
port

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English