Digi XBee-PRO S3

To Next Page

Digi International Inc.

11001 Bren Road East

Minnetonka, MN 55343

877 912-3444 or 952 912-3444

http://www.digi.com

XBee-PRO

900HP/XBee-PRO

XSC RF Modules

XBee-PRO RF Modules by Digi International

Models: XBEE-PRO S3, XBEE-PRO S3B

Hardware: S3, S3B

90002173_L

2/4/2014

Main Page

Default Chapter3
- Table of Contents3
Preface: How to Use this Manual6
1. Xbee-PRO 900HP RF Module Hardware7
- Xbee-PRO S3B Hardware Description7
- Worldwide Acceptance7
- Xbee-PRO 900HP Specifications8
- Xbee-PRO 900HP Serial Communications Specifications9
  - Uart9
  - Spi9
- GPIO Specifications9
- Hardware Specifications for Programmable Variant10
- Xbee-PRO 900HP Mechanical Drawings11
- Xbee-PRO 900HP Pin Signals12
- Xbee-PRO 900HP Design Notes12
- Xbee-PRO 900HP Module Operation for Programmable Variant13
- Xbee-PRO 900HP Programmable Bootloader15
2. Xbee-PRO 900HP RF Module Operation22
- Xbee-PRO 900HP Basic Operational Design22
- Xbee-PRO 900HP Serial Communications22
- Xbee-PRO 900HP Modes of Operation29
3. Xbee-PRO 900HP Networking Methods33
- MAC/PHY Basics33
  - Related Parameters: CM, HP, ID, PL, RR, MT33
- Xbee-PRO 900HP Addressing Basics33
  - Related Parameters: SH, SL, DH, DL, to33
- Point to Point/Multipoint (P2MP)34
  - Throughput34
- Repeater/Directed Broadcast34
  - Related Parameters: CE, NH, NN, BH34
- Digimesh Networking35
4. Xbee-PRO 900HP Sleep Mode38
- Sleep Modes38
- Asynchronous Sleep Operation39
  - Wake Timer39
- Xbee-PRO 900HP Indirect Messaging and Polling (P2MP Packets Only)40
  - Indirect Messaging40
  - Polling40
- Synchronous Sleep Operation (Digimesh Networks Only)40
Xbee-PRO 900HP Command Reference Tables47
6. Xbee-PRO 900HP API Operation58
- API Frame Format58
- Xbee-PRO 900HP API Serial Exchanges60
Supporting the API61
Xbee-PORO 900HP Frame Descriptions61
- AT Command61
- AT Command - Queue Parameter Value62
- TX Request62
- Explicit TX Request63
- Remote at Command Request65
- AT Command Response66
- Modem Status66
- Transmit Status67
- Route Information Packet67
- Aggregate Addressing Update69
- RX Indicator70
- Explicit Rx Indicator71
- Data Sample RX Indicator72
- Node Identification Indicator72
- Remote Command Response74
75 8. Xbee-PRO 900HP Advanced Application Features75
Xbee-PRO 900HP Remote Configuration Commands75
- Sending a Remote Command75
- Applying Changes on Remote Devices75
- Remote Command Responses75
Xbee-PRO 900HP Network Commissioning and Diagnostics75
- Xbee-PRO 900HP Device Configuration75
- Xbee-PRO 900HP Network Link Establishment and Maintenance76
- Xbee-PRO 900HP Device Placement76
- Xbee-PRO 900HP Device Discovery77
- Xbee-PRO 900HP Link Reliability78
- Commissioning Pushbutton and Associate LED81
Xbee-PRO 900HP I/O Line Monitoring82
- I/O Samples82
- Queried Sampling82
- Periodic I/O Sampling84
- Digital I/O Change Detection85
General Purpose Flash Memory85
- Accessing General Purpose Flash Memory85
Over-The-Air Firmware Upgrades91
- Distributing the New Application91
- Verifying the New Application92
- Installing the Application92
- Things to Remember92
Appendix A: XSC Firmware93
- Xbee-PRO XSC Key Features94
  - Worldwide Acceptance94
- Xbee-PRO XSC Specifications94
- Xbee-PRO XSC Pin Signals96
- Xbee-PRO XSC Electrical Characteristics97
  - Xbee-PRO XSC Timing Specifications97
- Xbee-PRO XSC Mechanical Drawings98
- Serial Communications100
- Xbee-PRO XSC Modes of Operation102
- Xbee Programming Examples109
  - AT Commands109
  - Binary Commands109
- Xbee-PRO XSC Command Reference Table110
- Xbee-PRO XSC Command Descriptions111
- Xbee-PRO XSC Addressing129
  - Address Recognition129
- Xbee-PRO XSC Basic Communications130
  - Streaming Mode (Default)130
  - Repeater Mode131
- Xbee-PRO XSC Acknowledged Communications135
  - Acknowledged Mode135
Agency Certifications for S3B Hardware138
- FCC (United States) Certification138
- IC (Industry Canada) Certification139
- IDA (Singapore) Certification143
- Brazil ANATEL143
Agency Certifications for Legacy S3/S3B Hardware144
FCC (United States) Certification144
- Labeling Requirements144
- FCC Notices144
- Limited Modular Approval145
- Additional Information150

Digi XBee-PRO S3 - Manual

Table of Contents

Other manuals for Digi XBee-PRO S3

Related product manuals