XBee‐PRO®900HP/XBee‐PRO®XSCRFModules
©2014DigiInternationalInc. 143
IDA (Singapore) Certification
Labeling
The labeling of equipment is per Info-communications Development Authority of Singapore (Singapore IDA,
http://www.ida.gov.sg/). This license is only for the Digi XB900HP radio and not the final product, so
customers must be aware that they should find a consultant who is aware of the requirements and can guide
them through the process of obtaining a license for their product with Singapore IDA. The license number is
DA105737.
Frequency band
The available frequency band for Singapore is 920 MHz to 925 MHz. The Digi radio cannot interfere with other
services and is not in a protected band.
Antenna gain
The maximum allowed antenna gain is 2.1 dBi, which is the gain of a dipole.
Brazil ANATEL
This device complies with Brazil ANATEL standards in Resolution No. 506. For the XBee PRO S3B product using
900HP firmware, the operating frequencies are 902 MHz to 907.5 MHz and 915 MHz to 928 MHz. For the XBee
PRO S3B product using XSC firmware, the operating frequencies are 915 MHz to 928 MHz. The following
information is required in the user manual for the product containing the radio and on the product containing
the radio (in Portuguese):