Digi XBee-PRO S3 - Xbee-PRO XSC Key Features; Worldwide Acceptance; Xbee-PRO XSC Specifications

XBee‐PRO®900HP/XBee‐PRO®XSCRFModules
©2014DigiInternationalInc. 94
XBee-PRO XSC Key Features
Worldwide Acceptance
FCC Certified (USA) - Refer to Appendices B and C for FCC Requirements.
Systems that include XBee-PRO Modules inherit Digi’s FCC Certification
ISM (Industrial, Scientific & Medical) frequency band
Manufactured under ISO 9001:2000 registered standards
XBee-PRO™ XSC (900 MHz) RF Modules are approved for use in US and Canada.
RoHS compliant
Xbee-PRO XSC Specifications
TableA‐01. XBee‐PROXSCRFModuleSpecifications
Specification XBee-PRO XSC (S3 Hardware) XBee-PRO XSC (S3B Hardware)
Performance
Indoor/Urban Range Up to 1200ft (370m) up to 2000ft (610m)
Outdoor line-of-sight Range
Up to 6 miles (9.6km) w/ dipole antenna
Up to 15 miles (24km) w/ high-gain antenna
Up to 9 miles (14km) w/ dipole antenna
Up to 28 miles (45km) w/ high-gain antenna
Interface Data Rate
125 - 65,000 bps
(Software selectable, includes non-standard baud rates)
Throughput Data Rate 9,600 bps 9.6kbps or 19.2kbps
RF Data Rate 10kbps 10kbps or 20kbps
Transmit Power Output +20dBm (100mW) Up to 24dBm (250mW) software selectable
Long Range Data Integrity
XBee-PRO XSC-S3:
• Indoor/Urban: 1200' (370m)
• Outdoor line-of-sight: Up to 6 miles (9.6
km)
• Outdoor line-of-sight: Up to 15 miles (24
km) w/ high gain antenna
• Receiver Sensitivity: -106 dBm,
XBee-PRO XSC-S3B:
• Indoor/Urban range: 2000’ (610 m)
• Outdoor line-of-sight range: 9 miles (14 km)
• Receiver Sensitivity: -109 dBm
Advanced Networking & Security
• True peer-to-peer (no “master” required)
communications
• Point-to-point & point-to-multipoint topolo-
gies supported
• Retries and Acknowledgements
• 7 hopping channels, each with over 65,000
available network addresses
• FHSS (Frequency Hopping Spread Spec-
trum)
Easy-to-Use
• No configuration required for out-of-the-box 
RF data communications
• Advanced configurations available through 
standard AT & binary commands
• Portable (small form factor easily designed 
into a wide range of data radio systems)
• Software-selectable serial interface baud rates
• I/O Support: CTS, RTS (& more)
• Support for multiple data formats 
(parity, start and stop bits, etc.)
• Power-saving Sleep Modes