Need help?Do you have a question about the Digi ConnectCore and is the answer not in the manual?
General| Memory | Varies by model |
|---|---|
| Processor | NXP i.MX6 |
| Operating System | Linux |
| Connectivity | Yes |
| Ethernet | 10/100/1000 Mbps |
| Wireless Connectivity | Wi-Fi, Bluetooth (optional) |
| USB Ports | USB OTG |
| Serial Ports | UART |
| Digital I/O | Yes |
| Analog Inputs | Yes |
| Operating Temperature | -40°C to +85°C |
| Power Supply | 3.3V to 5V |
| Security | Secure boot, encryption |
Details the extensive features and capabilities of the ConnectCore for i.MX51 module.
Provides a visual representation of the Freescale i.MX51 CPU and module architecture.
Details the pin assignments for the module's connectors J1 and J2.
Explains the module's power supply inputs, outputs, and the MC13892 power management chip.
Describes DDR2 SDRAM, NAND Flash memory, and chip select memory map.
Details various interfaces including 1-Wire, Accelerometer, ADC, SSI, EMI, Ethernet, I2C, Video, Keypad, Memory Cards, PWM, RTC, SPDIF, SPI, Watchdog, UART, USB, and WLAN.
Lists the hardware components and connectors available on the development board.
Explains the functionality of various switches and push-buttons on the development board.
Details the function of different jumpers for enabling/disabling features and selecting options.
Describes the status LEDs for WLAN, power, user functions, and serial ports.
Covers Ethernet 1 and Ethernet 2 interfaces, including RJ-45 connectors and specifications.
Details HDMI, LCD, I2C, and JTAG interfaces with their respective connectors.
Describes MicroSD, SD/MMC, SPI, UART, USB, WLAN, and XBee interfaces.
Explains the user buttons and LEDs, and how they are connected to GPIO signals.
Provides dimensions, fastener recommendations, and operating/storage temperature ranges.
Details antenna specifications for 802.11 a/b/g/n and Ethernet 1/2 standards.
Covers supply voltages, current draw, and I/O DC parameters for various signal types.
Illustrates the top, bottom, and side views with key dimensions in millimeters.
Lists connector reference numbers and the mated height of the module and development board.
Details compliance with FCC rules for digital devices and radio frequency interface.
Covers RF exposure guidelines, modification restrictions, and Industry Canada compliance.
Provides Japan certification details and the Declaration of Conformity statement.
Lists the international standards the ConnectCore for i.MX51 meets for emissions, immunity, and safety.
Documents changes made to the manual in revisions A through D.
Documents changes made to the manual in revisions E and F.
To Next Page
