Digi ConnectCore - Jumpers Configuration

ConnectCore for i.MX51
©2011DigiInternational,Inc. 62
Jumpers
Battery Enable, J5
When J5 is set, the development board can be powered by an external battery connected to
J23.
Battery
Enable, J5
LED 1, J16
UART/XBee,
J30 & J31
WLAN Disable, J17
Module
Power
Source, P29
Button 1,
J28
LED 2,
J9
Button 2,
J29
Touch Sel, J20
Coin cell
Enable, J3
JTAG Mod, J4
Downloaded from Elcodis.com electronic components distributor