DigiDesign Bomb Factory Plug-ins - HD Accel Card

Bomb Factory Plug-ins Guide60
HD Accel Card
Digidesign TDM plug-ins on HD Accel cards have the following DSP requirements:
44.1/48 kHz (Mono and Stereo)
Table 1. Maximum instances of real-time TDM plug-ins per DSP chip for an HD Accel card, at 44.1 or 48 kHz sample
rates (mono and stereo).
Sample Rate
44.1/48 kHz
Mono
44.1/48 kHz
Stereo
Compatible DSP
Chips per
HD Accel Card
Plug-in
Instances
on Chips
with
SRAM
Instances
on Chips
without
SRAM
Instances
on Chips
with
SRAM
Instances
on Chips
without
SRAM
BF Essential Clip Remover
n/a n/a n/a n/a n/a
BF Essential Correlation
Meter
n/a n/a n/a n/a n/a
BF Essential Meter Bridge
n/a n/a n/a n/a n/a
BF Essential Noise Meter
n/a n/a n/a n/a n/a
Bomb Factory BF 76
9988 9
Bomb Factory BF-3A
9977 9
Bomb Factory BF-2A
9977 9
Cosmonaut Voice
n/a n/a n/a n/a n/a
Fairchild 660
8844 9
Fairchild 670
n/a n/a 5 5 9
JOEMEEK VC5 Meequalizer
11 11 5 5 9
JOEMEEK SC2 Compressor
9999 9
Moogerfooger Analog Delay
9944 9
Moogerfooger 12-Stage
Phaser
12 12 5 5 9
Moogerfooger Ring
Modulator
5533 9