Appendix B: DSP Delays Incurred by TDM Plug-ins 69
appendix b
DSP Delays Incurred by TDM Plug-ins
Virtually all TDM plug-ins incur some amount
of signal delay.
If you are working with mono tracks, or are pro-
cessing all channels with the same plug-in, the
signal delays are not long enough to be signifi-
cant and should not be a concern.
This signal delay is significant only if you use a
plug-in on one channel of a stereo or multichan-
nel signal but not the others, since this can
cause the channels to be slightly out of phase.
The following table shows the delays inherent
in each type of Bomb Factory TDM plug-in:
≈
Pro Tools systems provide automatic Delay
Compensation (and other methods) to com-
pensate for signal processing delays. For de-
tailed information, see the
Pro Tools Refer-
ence Guide
.
Table 5. Samples of delay incurred by each TDM plug-in
on HD cards
Plug-in
Samples of Delay
on Pro Tools|HD
Cards
BF Essential Clip Remover
0
BF Essential Correlation
Meter
0
BF Essential Meter Bridge
0
BF Essential Noise Meter
0
Bomb Factory BF 76
0
Bomb Factory BF-3A
3
Bomb Factory BF-2A
3
Cosmonaut Voice
0
Fairchild 660
0
Fairchild 670
0
JOEMEEK VC5
Meequalizer
0
JOEMEEK SC2
Compressor
3
To Next Page
Loading...
Need help?
General
