DigiDesign Bomb Factory Plug-ins User Manual

Bomb Factory Plug-ins Guide66
HD Core and Process Card
Digidesign TDM plug-ins on HD Core and Process cards have the following DSP requirements:
Mono and Stereo
Table 4. Maximum instances of real-time TDM plug-ins per DSP chip for an HD Core or HD Process card, at different
sample rates (mono and stereo).
Sample Rate 44.1/48 kHz 88.2/96 kHz 176.4/192 kHz
Compatible DSP
Chips per
HD Core or HD
Process Card
Plug-in Mono Stereo Mono Stereo Mono Stereo
BF Essential
Clip Remover
n/a n/a n/a n/a n/a v n/a
BF Essential
Correlation
Meter
n/a n/a n/a n/a n/a n/a n/a
BF Essential
Meter Bridge
n/a n/a n/a n/a n/a n/a n/a
BF Essential
Noise Meter
n/a n/a n/a n/a n/a n/a n/a
Bomb Factory
BF 76
4422 n/a n/a 9
Bomb Factory
BF-3A
4 4 2 2 not
supported
not
supported
9
Bomb Factory
BF-2A
4422 1 1 9
Cosmonaut
Voice
n/a n/a n/a n/a n/a n/a n/a
Fairchild 660
3211 n/a n/a 9
Fairchild 670
n/a 2 n/a 1 n/a n/a 9
JOEMEEK VC5
Meequalizer
5221 1 0.5 9

DigiDesign Bomb Factory Plug-ins Specifications

General

Brand	DigiDesign
Model	Bomb Factory Plug-ins
Category	Software
Language	English