INSTALL GUIDE
Keypad & RFID
|
Basic & Advanced
3
Security Strike Plate
Recommended for latch products
Angled Strike Plate
General Purposes Use
Double-Door Strike Plate
Requires a base latch on strike door (Not included)
This section is for new installations with wood, MDF, or non-metal doors�
REQUIRED COMPONENTS
1 - Phillips Driver (#1)* 1 - Phillips Driver (#2)*
1 - Power Drill*
1 - Pencil*
1 - ¹/6" Wood Drill bit*
Removable Tape*
1 - ³/32" Wood Drill bit*
1 - Ruler*
1 - ³/4" Wood Drill bit*
Recommended Forstner Bit
Recommended 90º Square
Recommended Brad Point BitRecommended Brad Point Bit
Note: Mounting hardware requires a torque level of: 21.4 kgf/cm² ±20% for hand or powered tools to insure proper lock functionality.
WOOD DOOR PREPARATION
REQUIRED TOOLS & MATERIALS
To Next Page
Loading...