EasyManua.ls Logo

DiGiQuest G23+ - NETWORK Menu

DiGiQuest G23+
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DIGIQUEST
16
Pictures
By selecting this menu you can access the image files (JPG and BMP) in
the connected USB memory. At the bottom of the screen there are
several options that can be selected by pressing the corresponding
button:
- RED button: press to add the selected picture to Fav list.
- GREEN button: press to switch the partition of Hard disk.
- YELLOW button: to display the favorite lists if created (see RED
button).
- Info button: press to switch the Sort Type.
- BLUE button: press to set slide show option.
- Press EXIT button to back to the previous menu.
Press or button to select the desired file and press OK to start
playback. During playback you can use the RED button to activate the
zoom and the and buttons to rotate the image.
Press EXIT or MENU to return to the previous menu.
Movies
Press or button to highlight the desired item and press OK button
to play the selected movie.
- GREEN button: press to switch the partition of Hard disk (if any).
- Press EXIT or MENU button to back to the previous menu.
NOTE: The manufacturer cannot guarantee the playback of files
even though the extension is supported: this depends on the
Codec used, the data bit rate and the resolution.
Device Information
This menu display some parameters of the external USB device.
USB formatting
Use to format the inserted memory.
CAUTION: all data on the memory will be deleted.
NETWORK menu
This menu allows you to set the network options and to see the APPs
present on the decoder.
Network configuration
You can connect to the network via LAN. Go to the Active item below
this icon, the connection will be activated (green dot

Related product manuals