DiGiQuest G23+ - LOCAL TIME SETTING Menu; SYSTEM Menu

ENGLISH
13
- AD Volume Offset: -3~3
- HDMI CEC: On/Off. When the CEC function is on, if the TV to which
you connect this unit is equipped with and CEC function is active, you
can use the TV remote control to also control some of the main functions
of the set-top box such as volume, power, channel change. Also activate
the CEC function on your TV.
NOTES
• This function is active only when the decoder is connected to the TV
through HDMI.
• If you activate the CEC function on a TV connected to multiple devices,
you may need to select the TV source for the desired device.
• Even if the TVs are equipped with CEC, compatibility is not guaranteed.
• If your TV or set-top box is not working properly, try turning off the CEC
feature on both sets and testing the functionality.
LOCAL TIME SETTING menu
This menu allows you to set the time.
- Time: not adjustable.
- Time Zone Setting: to set Auto or Manual time zone. If you set
Manual, you will be able to set the time zone manually in half hour
intervals.
SYSTEM menu
System Information
You will find here information about the software and hardware.
Factory Setting
To reset the decoder and delete all existing channels. Use this function
with caution, all stored data will be lost! Press OK key, a warning
window will appear: highlight Yes, press OK key to reset the decoder,
delete all channels and settings entered by the user. Highlight No, press
OK key to cancel the operation.
Timer
You can set a timer to display a channel. The decoder will switch to the
set channel just before the event.
After entering this menu, press the BLUE (Add) button to enter a timer:
Timer Mode: Off/Once/Daily/Weekly.
Wakeup Channel: select a Wakeup channel.