Page 12
Multiple 8 Ohm Speakers
The IP7-FX is also capable of driving multiple 8 Ohm speakers without
25/70V transformers.
• Two 8 Ohm speakers must be wired in series
• Four 8 Ohm speakers must be wired in series-parallel
Please note the following guidelines:
• Connect the Speakers to the J2-6 (SPKR 8Ω+) and J2-7 (SPKR
8Ω-) (polarity independent)
• Speakers should be installed within 200 feet (60 meters) of the
IP7-FX using 18-gauge wire
• The total watts available from the IP7-FX are distributed equally
among the speakers so they will all have the same volume
To Next Page
Loading...
