Digital-Ally DVM-800 User Manual

860-00186-00 Rev J
Digital Ally Inc.| Device Configuration
3-2
Go to the Admin>Devices Tab. A separate configuration field will be available once a valid serial number
for the device has been added into the system. These settings will define how all users will interface
with the DVM (see below). Click on each sub-heading to reveal the available configuration options.
When done, press Save.
The button in the lower part of the main screen can be used to reset all configurations for
this device to the factory settings. This will not have any effect on the WTM Settings for wireless
connectivity located in the Data Transfer screen.

Digital-Ally DVM-800 Specifications

General

Brand	Digital-Ally
Model	DVM-800
Category	Dash Cameras
Language	English