- 12 -
The Dial-In and Delay Screen
Bracket Mode Screen 1
The Dial-in and Delay screen is the “home” Bracket
Mode screen. Press the BRKT key to return to this screen at
any time. This screen is where you enter your dial-in and
delay times.
The Selection Arrows on the right side of the screen
are used to show the line that is currently selected.
Use the NEXT key to change the selected line.
Your Dial
Use the CLEAR key, then use the NUMERICAL
keys to enter a time. Or use the or key to increase or
decrease the time by one. Dial Display explained page 43.
Their Dial
Use the CLEAR key, then use the NUMERICAL
keys to enter a time. Or use the or key to increase or
decrease the time by one.
Delay 1
Use the CLEAR key, then use the NUMERICAL
keys to enter a time. Or use the or key to increase or
decrease the time by one.
Delay 2 (used for second hit at the tree)
Use the CLEAR key, then use the NUMERICAL
keys to enter a time. Or use the or key to increase or
decrease the time by one.
The Delay 2 line is only used with Push-button
Modes 2, 3, or 4.
Press the SET UP key to go to the Special Functions
Screen 1.
To Next Page
Loading...
