DIGITAL DELAY Mega 475 User Manual

- 14 -
Special Functions Screen 2
Bracket Mode Screen 3
This screen has settings for the S.L.E. (Starting Line
Enhancer), P.T.S.O. (Programmable Throttle Stop Override),
Timer 1 Range and Timer 2 Range. The Timer ranges adjust
whether a Timer can be programmed down to a Thousandth
or Hundredth of a second.
The Selection Arrows on the right side of the screen are
used to show the line that is currently selected.
Use the NEXT key to change the selected line.
S.L.E.
Use the CLEAR key, then use the NUMERICAL
keys to enter a time. Use the  or  key to turn starting line
mode on or off. Hold the ZERO key down to change the
S.L.E. Throttle Mode.
P.T.S.O
Use the CLEAR key, then use the NUMERICAL
keys to enter a time. Or use the  or  key to increase or
decrease the time by one. All zero’s shown as ( -- ) is off.
Timer 1
Use the  or  key to switch the Timer 1 range
between high “HI” and low “LO” modes.
Timer 2
Use the  or  key to switch the Timer 2 range
between high “HI” and low “LO” modes.
Press the SET UP key to go to the Timer 1 screen.

DIGITAL DELAY Mega 475 Specifications

General

Brand	DIGITAL DELAY
Model	Mega 475
Category	Automobile Accessories
Language	English