DIGITAL DELAY Mega 475 User Manual

- 15 -
Timer 1 and 2 Screens
Bracket Mode Screens 4 and 5
The next two screens are the 4-Stage Timer screens.
All of the Timer screens are adjusted in the same way. The
Timer 2 screen is only accessible when the S.F.O. mode is
set to 2.
The Selections Arrow on the right side of the screen
are used to show the line that is currently selected.
Use the NEXT key to change the selected line.
Stage 1
Use the CLEAR key, next use the NUMERICAL
keys to enter a time. Or use the  or  key to increase or
decrease the time by one.
Stage 2
Use the CLEAR key, next use the NUMERICAL
keys to enter a time. Or use the  or  key to increase or
decrease the time by one.
Stage 3
Use the CLEAR key, next use the NUMERICAL
keys to enter a time. Or use the  or  key to increase or
decrease the time by one.
Stage 4
Use the CLEAR key, next use the NUMERICAL
keys to enter a time. Or use the  or  key to increase or
decrease the time by one.
To change the Throttle Mode, hold down the ZERO
key for 2 seconds, explained on page 38.
Use the SET UP key to get to the Shift Control
screen.

DIGITAL DELAY Mega 475 Specifications

General

Brand	DIGITAL DELAY
Model	Mega 475
Category	Automobile Accessories
Language	English