DIGITAL DELAY Mega 475 User Manual

- 17 -
Dial Board Intensity Control
Bracket Mode Screen 7
The Mega 475 has separate Day and Night intensity
settings. Values from zero (Off) to six, the brightest, can be
set for both Day and Night.
The Selection Arrows on the right side of the screen
are used to show the line that is currently selected.
Use the NEXT key to change the selected line.
Day Intensity Setting (Top Line)
Use the  or  key to increase or decrease the
intensity value by one. A zero turns off the Day Dial
Display Controller feature of the Mega 475.
Night Intensity Setting (2
nd
Line)
Use the  or  key to increase or decrease the
intensity value by one. A zero turns off the Night Dial
Display Controller feature of the Mega 475.
Note: To turn off the Dial Display control part of the Mega
475, set the intensity setting for both Day and Night to zero.
This would be done if the Mega 475 is not connected to a
Dial Display or if there is communication failure that can’t
be resolved.
Press the SET UP key to go to the Driver’s Reaction
Tester screen.

DIGITAL DELAY Mega 475 Specifications

General

Brand	DIGITAL DELAY
Model	Mega 475
Category	Automobile Accessories
Language	English