Picture 3-8 Paste the 2mmnew.tap file to this directory
Hrere the 2mmnew.tap file is selected. Press the key to copy the 2mmnew.tap file into memory
Choose your target directory or target folder, click to paste the 2mmnew.tap file to this directory.
See picture 3-8 for reference
1）Copy the file
Picture 3-6 Select 2mmnew.tap file and copy the file
2）Paste the file
Picture 3-7 Switch to the target folder
Page -22Digtital Dream 4 Axis Motion Controller DDCS V2.1 User’s Manual
To Next Page
Loading...
