Highlight the required file and click to delete the file
Picture 3-9 Move the blue strip to the 2mmnew.tap file, click MODE to delete
Picture 3-10 Delete the 2mmnew.tap file
4) Load the G code file
Picture 3-11 Search for the file2mmnew.tap
Highlight the G code file required and click . The file will be loaded and the screen will change
back to the Main Screen for processing. The file name will be displayed.
3) Delete a file
Page -23Digtital Dream 4 Axis Motion Controller DDCS V2.1 User’s Manual
To Next Page
Loading...
