2–1
2
Installation
The DECserver 90M can be installed as a standalone device – on a tabletop or
mounted to a wall – or added to the DEChub 90 Ethernet backplane.
Before you begin the hardware installation –– if Flash RAM is not present ––
ensure that the software has been properly installed. Refer to the appropriate
DECserver Network Access Software Installation documentation.
Complete the installation by:
• Installing the DECserver 90M hardware
• Running the DECserver 90M self-tests
• Loading the DECserver Network Access Software
• Verifying the operation of the DECserver 90M ports
2.1 Installing the DECserver 90M Hardware
The following sections describe how to install the DECserver 90M hardware as a
standalone device or in a backplane.
To Next Page
Loading...
