12
5. Video Repeat
This is used to set the repeat function for Video. When set to Repeat One the selected
video will play in a loop. When set to Repeat All, all video clips will play in a loop. When
Set to Repeat Off, all video clips will play once.
6. Picture Copy Type
This is used to define what is to be done with an image when copying from external
memory to internal memory. When pictures are taken with the camera set for the
highest resolution, the size of the image may be very large. Although these large
images may be useful for other tasks, it is not necessary to have such high density for
playing on the frame. This function is used to resize the original image for best fit on the
display, usually resulting in reducing image storage needs or storing more images in
internal memory. Check the Question and Answer section in the rear of this manual.
7. Date & Time Setting
This is used to set the date and time. These settings are used in several other areas to
include Clock, Calendar, Auto Power On, and Auto Power Off. Use the Up and Down
buttons to change each setting. Use the Left and Right buttons to go from setting to
setting. When complete press ENTER.
8. Auto Power On
This is used to set the time for the frame to automatically turn On everyday. Use the Left
and Right buttons to navigate between hour and minute, and the UP and DOWN
buttons to modify the time. When complete press ENTER.
To Next Page
Loading...
Need help?
General
