29 | VMAX960H CORE™ Digital Video Recorder
When user click the overlapped period, “Recorded video Selection” message will pop up. Select whether to play DST data or
Non-DST data.
Click OK to play DST image. Click CANCEL to play Non-DST image.
[“DST” image is displayed on screen] [“Non-DST” image is displayed on screen]
3.10 Screen Saver
The Screen Saver features protects the screen and data of the DVR by turning off after a set time of inactivity. To enable the
Screen Saver, right-click anywhere on the screen and go to the menu setup: SYSTEM > SYSTEM INFO and click “SCREEN
SAVER”. Select HDMI output and set the Waiting Time from the options in the drop-down menu.
The Screen Saver will not work if Waiting Time is set to “NONE” or the HDMI box is unchecked. Screen
Saver may also be disabled during a firmware upgrade, HDD format, or data backup. The system will
continue to record while the monitor is off.
To Next Page
Loading...
