User’s Manual | 42
4.3 Record
Users can configure various record settings such as Continuous, Event, and Panic for each individual channel in the Record
Setup Menu.
4.3.1 Record Setup
1. 1. Go to Record Setup. If Quick Setup is selected, record setup will be disabled. To enable, go to Setup Menu > Quick
Setup and disable the ‘Use Quick Setup’ option.
2. Choose the desired resolution, frame rate, quality and recording type for continuous recording.
3. Choose the desired resolution, frame rate, quality and recording type for Event recording.
4. Configure each channel separately, or use the ‘Copy Settings’ button to apply one channel’s settings to multiple
channels.
a. Choose the camera you want to copy from at the “From” field.
b. Choose the settings you want to copy by selecting the check box next to each one.
c. Check the checkbox next to the cameras to apply the copied setting(s) to on the “To” box.
To Next Page
Loading...
