Digital Watchdog VMAX960H CORE - System Startup and Shutdown

9 | VMAX960H CORE™ Digital Video Recorder
1.3 System Startup and Shutdown
1.3.1 System Startup
After connecting all necessary peripheral devices such as cameras, monitors and a mouse to the DVR, power up the DVR by
connecting DC12V 3A adaptor to the power jack on the rear panel. The boot log screen will appear. Please wait until the boot
process is complete.
To login, right-click anywhere on the screen. This will bring up the login screen, where you can enter the username and
password. There is only one Administrator Account configurable in the DVR system. It is assigned with an unchangeable
User ID marked as ‘admin’. The default password is empty (No Password). Administrator account has full access to the DVR
and its configurable parameters. The Administrator Account also has the ability to create new users and to assign rights to the
new user accounts. Those new users created by the Administrator can also login with a specific password set by the
Administrator.
N
OTE
Do not forget the administrator’s password that was set for the first time. In case the password is lost,
contact your vendor.
N
OTE
The mouse is included. In case you need to replace it, it is highly recommended to choose well-known
major brands such as DELL, MICROSOFT, LOGITECH, or SAMSUNG.