Digital Watchdog VMAX960H CORE - IR Remote Controller

User’s Manual | 14
2.3 IR Remote Controller
The VMAX960H CORE DVR comes with a complimentary IR remote controller. In order to use the remote controller, the ID
must match on both the DVR and the controller.
(Default ID # for DVR and IR Remote Controller is “1”.)
If you have more than two DVRs, you can control them with the same remote controller by setting up their ‘Remote ID’ from
‘1’ up to ‘8’.
The function buttons of the IR Remote Controller are as below.
No.
Functions
1
Start/ stop instant (emergency) recording
2
Numeric buttons for channel view selection and text input
3
Auto-sequence on live display
4
Freeze current view
5
Go to call monitor view
6
View next /previous channel in single channel view
7
Start instant playback
8
Open search menu
9
Ok (select) button
10
Mute audio
11
Playback on Search Mode
12
(Fast Backward/Playback/Stop/Fast Forward)
13
Exit
14
Display mode
15
PIP Mode
16
Bookmark
17
Zoom in & out
18
Backup button
19
Enable PTZ control
20
Directional buttons (up/down/right/left)
21
Open setup menu