Digital Watchdog VMAX960H CORE - Page 33

33 | VMAX960H CORE™ Digital Video Recorder
- Display Options- Setup OSD information in live and playback modes, transparency, spot output, sequence dwell time,
spot-out dwell time, and pop-up camera
o OSD:
 Select which information to display in the OSD on each channel in Live.
 Select which information to display in the OSD on each channel in Playback.
o Set the OSD’s transparency level. The higher the number, the more transparent the text will appear.
o Setup a dwell time for the OSD text, after which, the OSD will disappear.
o Setup a dwell time for the Setup Menu, after which, the Menu will disappear.
o Set sequence dwell time- Setup how long each channel will be displayed in Sequence mode, before
switching to the next view.
o Spot-out Monitor:
 Spot out display mode - Supports multi display mode (Full, 4, 9, 16) on digital spot output.
 Spot out channel select- Select which channels to display on spot out sequence.
NOTE
Non-selected channels will appear as covert channels with a black screen instead of video
 Spot out cam popup- If camera popup is set in Sensor, Motion notify, the camera will also popup in
the Spot monitor.
 Spot Monitor interval- Spot Sequence time setting
- Screen Saver Setup- See section 3.10 Screen Saver for more information.