Digital Watchdog VMAX960H CORE - Page 64

User’s Manual | 64
6.4.4 Main Toolbar – Export
No Item Description
1
Image
Capture an image of the selected channel. If you are in multi-channel view, the
selected channel will appear with a yellow frame. The image saves as a JPEG in
the ‘My Documents’ Folder by default.
2
Movie
Save the selected channel in MP4 format movie file. To start recording, press the
‘Clip’ button once. A red [R] will appear at the bottom right corner of the selected
channel, indicating recording for the clip is taking place. Press the ‘Clip’ button
again to end recording. The file will save by default to the ‘My Documents’ folder.
3
Print Print selected channel. Setup the printer configuration from the print setup screen.
6.4.5 Main Toolbar – Main
No
Item
Description
1
Live
Connect to the selected site in Live mode.
2
Search
Connect to the selected site in Search mode.
3
Disconnect
Disconnect the selected single channel.
4
Disconnect All
Disconnect all connected sites and channels on the display.
5
Display Mode
Choose the display mode from single, 4 split, 9 split, 16 split, 20 split, 36 split, 64
split.
6
Full
Shows Full screen display. This view hides the Pivot’s menu bar, sites list panel,
PTZ and time bar. To exit full screen view, press the ‘Esc’ button.
7
Sequence
Start/ stop Sequence of the different channel displays.
8
Multi Monitor
Create an additional display window to drag to a secondary monitor.
9
Panorama
Show frame-by-frame for a selected single channel in Search mode.
10
Thumbnails
Thumbnail search for a selected single channel in Search mode.