EasyManua.ls Logo

DigiTech Artist 2120 - Section 3: Editing and Customizing Programs; Editing a Program Overview; Selecting;Changing Effect Modules; Selecting a Default Effect

DigiTech Artist 2120
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Editing a Program
It is extremely easy to create custom Effect programs because your 2120 VGS gives you access to a complete library of professionally developed
effects (“Defaults”). An example of this editing procedure is as follows:
• From Program mode, press the <Pitch> button. The display will appear something like this:
When you enter FX Edit mode, the first page of every FX module allows you to:
1) Bypass that effect module (by turning it on or off) using the <1> knob.
2) Select an effect module (Only in the digital effect section), using the <2> knob.
3) Store the Default using the <3> knob (for more info on storing Defaults, see pg. 24)
4) Select a Default for the selected Effect module using the <4> knob.
Selecting/Changing Effect Modules
Each program can be comprised of up to eight digital effects (in addition to the Preamp section). You can scroll through the modules in each
program two different ways:
1. By pressing the <Edit> button to enter FX Edit mode and using the <Program/Effect> wheel to scroll through the different
modules, or
2. By using the FX Library buttons. Pressing the <Preamp> button takes you directly to the first module in the preamp section.
Subsequent presses will scroll you through the successive modules in the preamp section. Likewise, pushing the <Dly/Rvb>
button takes you directly to the first module in the Digital FX section which has a delay or reverb loaded in it. Subsequent pushes
of the button scrolls you through subsequent modules that are loaded with a delay or reverb (assuming there are more delays or
reverbs loaded in the program of course.)
Once you reach a module you want to change (ie: you want to swap a delay for a reverb), use the <2> knob to select a new effect. Or, to
instantly load a desired effect press either the <Mod> , <Pitch>, <Dly/Rvb>, or <Other> buttons depending on the type of desired effect
and the selected effect will instantly be loaded.
Selecting a Default
Once you have selected the effect you want in the program (ie: St Pitch), you can quickly scroll through several different St Pitch defaults stored
in your 2120 VGS's library.
FX:St Pitch OctaveUp
4
FACTORY USER
%kHz
msdB
On
1
CHANGEDLINK
%kHz
msdB
4th
2
CHANGEDLINK
%kHz
msdB
LINK
%kHz
msdB
F 4
4
LINK
PAGE
1
OF
3
COMP WAH TUBE EQ
L/R OUTS
DIGITAL
CLIP
#
b
GATE
SEAMLESS
BANK
EQDIST
Section - 3 Editing Programs
2120 VGS Artist
User Guide
22

Table of Contents

Related product manuals