4. Now turn the <1> knob to make the Preamp active for morphing assignment or if the Volume pedal is to be used and is selected at this
point. Once this is done, press the <Assign> button and the display will appear something like this if this parameter has not already
been assigned:
5. Now select the Expression pedal, and the display will appear something like this if the Morphing parameter has been selected:
6. The <1> knob lets activate or de-activate the selected expression pedal. The <2> knob lets you change the selected pedal. The <3>
and <4> knobs are used to set the minimum and maximum morphing levels between the Tube (
t
) and the Solid State (
d
digital). Once
you have made this assignment, make sure to save your changes by pressing the button.
6-b. If the Volume Control parameter has been selected, the display will appear as follows:
6-c. The <1> knob lets activate or de-activate the selected expression pedal. The <2> knob lets you change the selected pedal. The <3>
and <4> knobs are used to set the minimum and maximum volume levels. Once you have made this assignment, make sure to save
your changes by pressing the button.
To Next Page
Loading...
