DigiTech Bass Whammy - MIDI Program Changes; Classic Mode MIDI Mapping

MIDI Program Changes
The Bass Whammy uses MIDI Program Change commands for eect selection. Eects can be
selected in either an active or bypassed state. The following illustrations show the MIDI Program
Change mappings for Classic mode and Chords mode.
Eects MIDI Program Change Mapping (Classic Mode)
When set to Classic mode, the following illustration outlines the Program Change commands
recognized by the Bass Whammy and the corresponding eect setting and its status.
OCT 2OCT
OCT 10TH
OCT OCT
OCT 4TH
5TH OCT
5TH 5TH