Harmony Eects
This group of eects add a harmony to your incoming signal. Both the harmony note and the input
signal are mixed together as if two basses were playing simultaneously. As you rock the pedal back
and forth, the harmony note bends between two intervals specied by the selected eect setting,
but the input signal remains unchanged.
OCT UP/2 OCT UP– Bends the harmony between one octave above (toe up)
and 2 octaves above (toe down) the input note.
OCT UP/10TH UP – Bends the harmony between an octave above (toe up)
and a 10th above (toe down) below the input note.
OCT DN/OCT UP – Bends the harmony between an octave below (toe up)
and a octave above (toe down) the input note.
OCT DN/4TH DN – Bends the harmony between an octave below (toe up)
and a fourth below (toe down) the input note.
5TH UP/OCT UP – Bends the harmony between a fth above (toe up) and
an octave above (toe down) the input note.
5TH UP/6TH UP – Bends the harmony between a fth above (toe up) and
an sixth above (toe down) the
input note.
5TH DN/5TH UP – Bends the harmony between a fth below (toe up) and a
fth above (toe down) the input note.
4TH DN/5TH UP – Bends the harmony between a fourth below (toe up)
and a 5th above (toe down) the input note.
4TH DN/3RD UP – Bends the harmony between a fourth below (toe up)
and a major third above (toe down) the input note.
OCT 2OCT
OCT 10TH
OCT OCT
OCT 4TH
5TH OCT
5TH 5TH
Harmony
Presets
To Next Page
Loading...
Need help?
General
