6
or change the tempo of an existing loop.
The first downbeat of the measure flashes
red and the other beats flash green. If the
tempo for an existing loop is changed, the
loop plays back at the new tempo without
any change of pitch. Pressing and holding
this button will reset any tempo change
applied to an existing loop. Pressing
both the Tempo and Store buttons
simultaneously will enter the Setup menu
to set Rhythm Type, Time Signature, Pedal
Tempo, or Loop/Single phrase status.
19. Output Jack
Connect this output to the input of a
guitar amplifier, channel of a mixer, or pair
of headphones.
20. Loop Level
This knob controls the output level of the
loop phrase.
To Next Page
Loading...
Need help?
General
