5
14. Status LED
This LED indicates the status during
record, playback, and overdub:
Solid red: Record
Solid green: Play
Solid yellow: Overdub
Flashing red/green: Pedal Tempo
Record Count In
Flashing yellow: Undo/Redo
Flashing red: Clear
15. Footswitch Jack
This jack accommodates the FS3X
footswitch for remotely selecting loop
memories, tapping in the loop tempo, and
undo and clear functions.
16. Pedal Switch
The Pedal Switch is used to start
recording and toggle between playback
and overdubbing. The Pedal Switch can
also be used for tapping in tempo for a
new phrase as well as undo and redo the
last overdub. Pressing the Pedal Switch
two times quickly stops loop playback.
17. USB Jack
The 5-pin mini-B USB jack provides a
connection to a PC or Mac computer for
transferring loop files to and from the
JamMan
®
Solo using the JamManager
TM
Loop Librarian software, downloadable at
www.digitech.com.
18. Tempo Button
This button can be pressed multiple
times to set the tempo for a new loop
To Next Page
Loading...
Need help?
General
