4
10. Pedal Tempo LED
This red LED lights when Pedal Tempo
Mode is enabled. In Pedal Tempo Mode, any
new loop location can have the tempo set
by tapping the Pedal Switch. Setting Pedal
Tempo Mode is explained on page 26.
11. Rhythm Level
This knob controls the level of the
Rhythm guide track.
12. Input Jack
Connect your guitar to this jack.
13. Store Button
This button is used to store and copy
recorded loops and changes to loop
attributes to the memory card. Pressing
and holding this button will initiate the
deletion of the current loop memory.
Pressing both the Tempo and Store
buttons simultaneously will enter Setup.
To Next Page
Loading...
Need help?
General
