User Manual
58
/
76
Press Recall softkey and select desired recalled ARB format file in USB disk.
The waveform will output from GEN OUT BNC port.
4. Remote Control
Connect the Type-A end of the USB cable to the computer, and connect the Type-B end to the USB port on the back of the
oscilloscope. A new device will be displayed in the computer device manager.
Install the IO driver:
Click the following URL to download the latest IO software:
https//www.keysight.com/main/software.jspx?ckey=2175637&lc=chi&cc=CN&nid=-11143.0.00&id=2175637
Double-click the application to start the installation. According to the installation prompts, install step by step, the installation
process may take several minutes.
To Next Page
Loading...
