28
Flanger ()
A Flanger uses the same principle as a Chorus but uses a shorter delay time and adds regeneration
(or repeats) to the modulating delay. This results in an exaggerated up and down sweeping motion
to the effect. The RP150 includes the following Flanger Effect models: (the DigiTech Flanger),
and (based on an MXR
®
Flanger).
Knobs 2, 3, and 4 have the following functions for the Flanger models:
Flanger
Model
Knob 2
(Speed)
Knob 3
(Depth)
Knob 4
(Regen)
P5
(X-Edit
TM
only)
P6
(X-Edit
only)
Speed Depth Regen Waveform Level
Speed Width Regen Manual --
Phaser ()
A phaser splits the incoming signal, and then changes the phasing of the signal. This signal is then
taken in and out of phase and mixed back in with the original signal. As the phasing changes, differ-
ent frequencies get canceled resulting in a warm sort of twisting sound.
Knobs 2, 3, and 4 have the following functions:
Speed - Knob 2 adjusts the rate (Speed) of the modulation. Ranges from to .
Depth - Knob 3 adjusts the Depth of the modulation. Ranges from to .
Regeneration - Knob 4 controls the regeneration of the effect. Ranges from to .
Waveform (X-Edit
TM
only) - Selects a waveform: , , or (Triangle, Sine, or Square).
Level (X-Edit only) - Controls the level of the effect. Ranges from to .
To Next Page
Loading...
Need help?
General
