DigiTech RP150 User Manual

3
Display shows
note played
Top LEDs indicate
note is sharp
Green LED indicates
note is in tune
Bottom LEDs indicate
note is flat
In Tuner mode, you can change your tuning reference. The default factory setting is A=440 Hz
(displayed as ). Rotating Knob 1 selects alternate and dropped tunings. Alternate tunings are
A=453Hz to A=427 Hz (displayed as  to ). Dropped tunings are A=A flat (displayed as ),
A=G (displayed as ), and A=G flat (displayed as ). The display window will briefly flash the cur-
rently selected tuning preference.
Exit Tuner mode by pressing both Footswitches simultaneously.

DigiTech RP150 Specifications

General

Brand	DigiTech
Model	RP150
Category	Music Pedal
Language	English