DigiTech RP500

28
Section Five - Appendix
General Specifications
A/D/A Converter: 24-bit high performance audio
Sampling Frequency: 44.1 kHz
DSP Section: AudioDNA2™ DSP Processor
Simultaneous Effects: 10
Preset Memory: 100 User Presets (1-00) / 100 Factory Presets (F1-F00)
Dimensions: 19.5˝ Length x 8.625˝ Width x 2.75˝ Height
Unit Weight: 6.6 lbs.
Analog Input Connections:
Guitar Input: 1/4˝ Unbalanced (TS)
Input Impedance: 500k Ohms
CD/MP3 Input: 1/8˝ Stereo (TRS)
Analog Output Connections:
1/4˝ Outputs
Left/Right Outputs: 1/4˝ Impedance Unbalanced
Left/Right Output Impedance: 500 Ohms per side
Maximum Output: +10 dBu
XLR Outputs
Left/Right Outputs: Balanced
Left/Right Output Impedance: 1 kohm per side
Maximum Output: +16 dBu
Headphones: 1/8˝ Stereo (TRS) – 13.6mW per channel @ 50 Ohms
Digital Connections:
Universal Serial Bus (USB): Type B, supports USB1.1 Full Speed (12 Mbps Bandwidth USB 2.0 compatible)
RP500 USB Recording Specifications:
Sample Rate: 44.1 kHz
Bit depth: supports 16-bit or 24-bit (depends on setup in Recording Software)
Power Requirements:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B-120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B -100
Europe: 230 VAC, 50 Hz Adapter: PS0913B -230
UK: 240 VAC, 50 Hz Adapter: PS0913B -240
Minimum Windows
®
PC Computer System Requirements:
Vista Home/Premium, XP Home/Professional (SP 2 installed, .NET Framework 2.0* installed)
800 MHz processor speed (1.2 GHz recommended)
512MB RAM (1GB recommended)
* .NET 2.0 will be installed during installation of X-Edit software if required on XP systems
Minimum Mac Computer System Requirements:
OS 10.4.x, 10.5
PowerPC or Intel
®
G4, G5 processor 800 MHz (1.2 GHz
recommended)
512MB RAM (1GB recommended)
Specifications