DigiTech RP55 User Manual

EQ
Equalization is used to shape the tonal response of your guitar signal. The EQ in the RP55
is similar to the tone knobs on an amplifier. Values 1-4 cut the level of each band, 5 is flat
(no cut or boost), and values 6-9 boost the level of each band.
Bass (b1- b9 ) - The Value buttons adjust the amount of low end enhancement (Bass).
Mid (d1- d9)- The Value buttons adjust the amount of mid range enhancement.
Treble (t1- t9)- The Value buttons adjust the amount of high end enhancement (Treble).

A Noise Gate is designed to eliminate noise while you are not playing. The AutoSwell
setting creates a volume pedal effect automatically with varying attack times. Different
guitars and pickups require different threshold settings. Choose a setting that fully mutes
the sound when you are not playing for the lowest setting.
G1-G9 - Selects the Silencer™ Noise Gate. Settings 1-9 select the threshold. Of turns the
gate effect off.
s1-s9 - Selects the Auto Swell volume swell effect. Settings 1-9 select the attack time.

The Chorus/Mod module is a multi-function module that lets you select the following
effects: Chorus, Flanger, Phaser, Tremolo, Panner, Vibrato, Rotary Speaker, AutoYa™, Envelope
Filter, Detune, Pitch Shift, and Whammy™ effects. When the Chorus/Mod module is
selected, the Value buttons are used to choose the type of effect. Only one of the effects
in this row can be used at a time. The following list describes each effect and their
parameters in more detail.


DigiTech RP55 Specifications

General

Presets	40
Amp Models	11
A/D/A Conversion	24-bit
Type	Guitar Effects Processor
Effects Types	Chorus, Delay, Distortion, Flanger, Phaser, Reverb, Wah
Inputs	1 x Instrument
Outputs	1 x 1/4" Output
Power Supply	9 VAC Adapter (Included)