DigiTech RP55 User Manual


There are several different connection options available when using the RP55. The following
diagrams show the connections for some of these options.
Before connecting the RP55, make sure that the power to your amplifier is turned off, and the
power to the RP55 is disconnected. There is not a power switch on the RP55. To turn the
RP55 off, disconnect your instrument from the Input Jack (for battery power) or disconnect the
optional power supply from the Power Jack or from the AC outlet.
Mono Operation
Connect your guitar to the Input of the RP55. Connect a single mono instrument cable
from the Stereo Output of the RP55 to the instrument input on your amplifier.
Guitar Amp Input / Effect Return
InputOutput


DigiTech RP55 Specifications

General

Presets	40
Amp Models	11
A/D/A Conversion	24-bit
Type	Guitar Effects Processor
Effects Types	Chorus, Delay, Distortion, Flanger, Phaser, Reverb, Wah
Inputs	1 x Instrument
Outputs	1 x 1/4" Output
Power Supply	9 VAC Adapter (Included)