DigiTech RP55 - Rear Panel Connections; Input Jack; Output Jack; Control In Jack


1 2 3 4
1. Input - Connect your instrument to this jack.
2. Output - This is a stereo TRS jack. Connect from this jack to the input of a single amplifier for mono
applications, or use a TRS stereo “Y” cord to connect to the inputs of 2 amplifiers for stereo
applications. This jack also can be used as a headphone jack.




- Connect a passive mono volume or TS (tip/sleeve) expression pedal to this jack to control
Volume, Wah, and Whammy™ in the RP55. TRS expression pedals are not supported.
- Connect only the optional power supply or equivalent to this jack (see Specifications).
4