DigiTech RP55 - Specifications



Input: 1/4” input
Output: 1/4” Stereo TRS (can be used as a headphone output)
1/4” input – Use a passive mono TS (tip/sleeve)
expression or volume pedal as an expression controller
5 Watts Maximum (w/ optional power supply)
~10 hours with continuous usage
24 bit Delta Sigma
40 User/40 Factory Presets
 Pickup Simulator, Wah, Compressor, 11 Amp Models, Acoustic
Guitar Simulator, 3 band EQ, Noise Gate, Cabinet Modeling,
Chorus, Flange, Phaser, Tremolo, Panner, Vibrato, Rotary
Speaker, Auto Ya™, Envelope Filter, Pitch Shift, Detune,
Whammy™, Delay, and Reverb
30 Patterns
up to 8
5.65” L x 6.5” W x 2.5”H
1 lb (2 lbs. w/ power supply)
22
6 AA Batteries or optional 9 VDC power supply.
*: Use only the correct power supply
according to the Voltage in your Country (see below table).


Japan (100 VAC, 50/60 Hz):
PS200R-100
*
or
PS0913DC-01
*
US and Canada (120 VAC, 60 Hz):
PS200R-120
*
or
PS0913DC-01
*
Europe (230 VAC, 50 Hz):
PS200R-230
*
or
PS0913DC-01
*
UK (240 VAC, 50 Hz):
PS200R-240
*
or
PS0913DC-02
*
Australia (240 VAC, 50 Hz):
PS200R-240-AU
*
or
PS0913DC-02
*

Model Output 
PS200R: 9 VDC 300 mA
PS0913DC: 9 VDC 1300 mA