29
VL Pro Owner’s Manual
The Edit Preset Menu
Noise
Gate
Noise
Gate
Noise Gate is turned Off or On. The Noise Gate is useful for muting the
signal when it falls below a specified threshold.
Threshold
The Noise Gate engages when the Lead Voice input falls below the speci-
fied threshold. Range: –80dB to –20dB
Compressor
Compressor
Compressor is turned Off or On
Type
Hard Knee
Abruptly reduces gain when the input level rises
above the threshold.
Soft Knee
Gently reduces gain when the input level rises
above the threshold.
Softer Knee
Very gently reduces gain when the input level
rises above the threshold.
Ratio
The ratio of the change in input level to the change in output level mea-
sured in decibels (dB). For example, a 2:1 ratio means that for every 2 dB
the input level changes, the output level changes 1 dB.
Warning: Using a high compression ratio increases susceptibility to
feedback due to the higher gain used.
Range: 1.0:1 to 5.0:1
Threshold
Defines the input level of the compressor knee. Range: -40dB to 0dB
Attack
Controls how quickly the compressor begins its effect on the signal.
Range: 1ms to 99ms
Release
Controls how quickly the compressor ends its effect on the signal.
Range: 10ms to 990ms
EQ
EQ Equalizer is turned Off or On.
Bass
Reduces or increases the volume of bass frequencies.
Range: –12dB to +12dB
Mid Gain
Reduces or increases the volume of midrange frequencies. Select this
frequency with Mid Frequency. Range: –12dB to +12dB
Mid Freq
Selects the center frequency that is reduced or increased with
Mid Gain. Range: 80Hz to 7650Hz
Treble
Reduces or increases the volume of treble frequencies.
Range: –12 to +12dB
Edit Pre-Effects Table (Continued)
To Next Page
Loading...
Need help?
General
