47
VL Pro Owner’s Manual
The Edit Preset Menu
Diffusion
Controls the initial echo density. High settings of Diffusion result in high initial echo
density, and low settings cause low initial density. In a real-world situation, irregular walls
cause high diffusion, while large flat walls cause low diffusion. Range: 0 to 99
ER
Time
Adjusts the amount of time before reverb early reflections occur.
This parameter is only available when the Vocal Hall or Room Type is selected.
Vocal Hall Range: 1ms to 150ms
Room Range: 1ms to 100ms
ER
Level
Adjusts the level of early reflections within the reverb.
This parameter is only available when the Vocal Hall or Room Type is selected.
Range: 0 to 99
Feedback
Time
Adjusts the Feedback Delay which changes the resonant frequencies of the Vocal Plate
Reverb. This parameter is only available when the Vocal Plate Type is selected.
Range: 1ms to 150ms
Feedback
Level
Adjusts the Vocal Plate reverb’s presence and prominence. This parameter is only avail-
able when the Vocal Plate Type is selected. Range: -99 to +99
Reverb
Level
Adjusts the overall reverb level. Range: 0 to 99
Edit Lexicon® Reverb Table (Continued)
To Next Page
Loading...
Need help?
General
