12
3. Same code reading day
For the setting of code reading delay for the same code, please refer to section 3.3.2. to set the
code reading delay for the same code.
4. Sensitivity
Sensitivity refers to the degree of change in the detection scene in the induction reading mode. When
the reading module judges that the degree of scene change meets the requirements, it will switch
from the monitoring state to the reading state.
4. Image stabilization time
Image stabilization time refers to the time required for the image stabilization of the reading module
that detects the scene change in the induction reading mode before reading the code. The setting
range of image stabilization time is 0~25500 ms, and the step length is 100ms. The default image
stabilization time is 0ms.
**0 ms
To Next Page
Loading...
