Digitus DA-81002 - 4. Illumination and Aiming; 1. Illumination; 2. Aiming

13
4. Illumination and Aiming
1. Illumination
There is a set of LEDs on the reading module specially equipped for shooting and reading, providing
auxiliary supplementary light, illuminating the light beam on the reading target, improving the
reading performance and the ability to adapt to weak ambient light. You can set according to actual
conditions of use:
• Illumination on: light is on during shooting, and it is off at other times
• Illumination on constantly: light will continue on after the reading module is turned on
• Illumination off constantly: light will not light up under any circumstances
** Illumination on
Illumination on constantly
Illumination off constantly
2. Aiming
There is an auxiliary aiming device on the reading module, which projects an indicator line when
photographing and reading, prompting the user to read the center of the scene image taken by the
reading module.
• Aiming on when taking pictures: light is on during shooting, and it is off at other times
• Aiming on constantly when taking pictures: light is always on during shooting, and it is off at
other times
• Aiming on constantly: The locating light will continue to glow after the reading module is
turned on.
• Aiming off constantly: In any case, the aiming does not light up
**Aiming on
Aiming on when taking pictures
Aiming on constantly
Aiming off constantly