Digitus DA-81002 - Data Prefixes and Suffixes; 6.1 Prefix; 6.2 Suffix

22
6.1 Prefix
The prefix is a string of character strings defined by the user before the decoded data. The user can
add and modify the prefix by reading the following setting codes.
Allow prefix
**Prohibit adding prefix
Read the following setting codes. With the "Data Code" setting code and the "Save" setting code,
the user can modify the prefix content.
Modify prefix
Note: The prefix allows up to 15 characters. For each prefix character, two hexadecimal values are
used to represent it. Refer to Appendix F for the hexadecimal conversion table of character values
6.2 Suffix
The suffix is a string of character strings defined by the user after the decoded data. The user can add
and modify the suffix by reading the following setting codes.
Allow suffix
**Prohibit adding suffix
Read the following setting codes. With the "Data Code" setting code and the "Save" setting code,
the user can modify the suffix content.
Modify suffix
Note: The suffix allows up to 15 characters. For each suffix character, two hexadecimal values are
used to represent it. Refer to Appendix F for the hexadecimal conversion table of character values.