54
6. You have now successfully created the print queue
that your print server will serve. Press the Escape key until
the Available Options main menu is displayed.
7. Select Print Server Information.
8. Press the Insert key to add a new NetWare print
server object. The print server name can be identical to the
PSxxxxxx name printed on the label of the print server.
9. Press Enter to select the newly created print server.
10. Select Print Server Configuration.
11. Select Printer Configuration.
12. Select Printer 0 (or Printer 1, Printer 2), and press
Enter, then select P1 (or P2, P3) in the Type field. If your
print server is with only one port, you do not need to
configure this Type field.
To Next Page
Loading...
